1 – Use:
The AVB-A is a device to be systematically installed on an industrial or agricultural site.
It arises after having treated the arrival of electricity, the priority groundings, the arrivals of water, the possible inverters and other specific equipment, thanks to adequate AVENI devices.
Note: This equipment is to be installed by an authorized person who can detect the overall action of the harmonizers on the site.
2 – Presentation:
It is made up of four tori around two half-tori in a transparent glass case. The box must remain closed in any case.
Contents: 1 x AVB-A
3 – Technical characteristics:
Dimensions: H 70 mm, Ø 150 mm
Materials: resin – plastic and glass
Appearance: blue – gray – pink and transparent
4 – Context of use:
The many pieces of equipment accompanying the progress of communications, new sources of energy and facilitating tasks in different areas of production, often go hand in hand with an imbalance in the environment.
The effects are aggravated by the multiplicity of frequencies emitted, as well as an unfavorable configuration of the geological basement (discontinuities).
In agriculture, yield-driven organisms will be more vulnerable to disturbances and will have less ability to adapt to difficult situations.
It is all the more necessary to improve the compatibility of places and equipment with the living.
5 – Operating principle:
Man-made electromagnetic waves, whatever their origin, can carry a signal that disturbs people, animals and plants.
It is a question of transforming the artificial wave information of our environment, often deleterious, into favorable signals for the living.
It is the informational imprints of plants and natural minerals embedded in the resin of the devices that allow this reversal of the effect.
They provide a repository close to nature, very useful to organisms for their functioning.
These devices make it possible to deal with nuisances originating from outside the domain or generated by equipment installed inside the buildings themselves.
They attenuate the effects of disturbances induced or potentiated by the geological nature of the subsoil (faults, cavities, embankments, telluric networks, presence of water, etc.).
6 – Expected effects:
Less fatigue, more comfort and well-being for most of the inhabitants of these previously disturbed places.
Sensitive people may experience immediate relief.
Most people will usually need a few extra days to weeks to experience effectiveness.
Other improvements in the situation, at the level of the walls (in the case of humidity by capillarity), or in the operation of electronic devices (during intermittent breakdowns) could also be observed in a few rare specific cases.
7 – Recommended location and instructions for installation:
Choose a place inside a building where the device is unlikely to interfere or be moved. It can be located at ground level, above beams or even in a closet (even closed).
Just lay it down, opaque resin base down, visible tori up, on a horizontal surface.
The chosen point can be arbitrary.
It is however necessary to orient the device to find the resonance with its manufacturing north.
That is to say that the small arrow in relief must point towards the magnetic north.
A particularly sensitive person will be able to refine this adjustment by sometimes preferring a slightly offset orientation.
8 – Maintenance advice:
The devices can be cleaned with a slightly damp microfiber cloth in case of accumulated dust or stains.
Do not use solvents or other chemicals in contact with them.
Do not expose to temperatures above 60°C.
The devices are to be placed sheltered from bad weather.
9 – Warranty:
AVENI devices are guaranteed for 2 years (excluding adhesive) for any manufacturing-related problems.
10 – Other devices available:
Devices for vehicles (AV-CAR – AV-CARE and AV-CAM) can achieve a similar effect and are intended to remain in the vehicle.
The effect obtained will be better when commonly used electronic devices (mobile phones – tablets – computers…) are harmonized with AVENI devices.
11 – Evolution over time:
Harmonization is carried out for the conditions encountered on the day of the intervention.
A modification in the environment (change of a transformer, a drilling pump – addition of a frequency on an antenna, solar panels on the roof of the neighbour, etc.) may lead to a review of the harmonization.
Regular monitoring is advised.