1 – Use:
In order to improve well-being in the house, the AVM-T harmonizing device is to be placed on the earthing cable when using a KIT-M or a KIT-ME.
Note: This equipment is to be installed by an authorized person who can detect the overall action of the correction on the dwelling (house – apartment or any other building).
2 – Presentation:
The AVM-T is generally supplied as part of a KIT-M or KIT-ME, but can exceptionally be delivered to the unit, to correct an additional earth connection (for an annex building – a photovoltaic installation, etc.).
Contents: 1 x AVM-T
3 – Technical characteristics:
Dimensions: H 70 mm, Ø 26 / 57 mm
4 – Context of use:
Our places of life, work, or even leisure, are today more and more disturbed by new technologies.
These can be found at the level of transmitting structures in the environment of buildings (relay antennas, etc.), or equipment specific to the dwelling (boilers – water heaters – solar panels, etc.).
The use of lighter devices (WiFi – mobile phones – computers…) can also have an impact on the serenity, attention and vitality of the inhabitants.
The effects are aggravated by the multiplicity of frequencies received, as well as an unfavorable configuration of the geological basement (discontinuities).
It is necessary to improve the compatibility of places, and of this equipment, with the living.
5 – Operating principle:
Man-made electromagnetic waves, whatever their origin, can carry a signal that disturbs people, animals and plants.
It is a question of transforming the artificial wave information of our environment, often deleterious, into favorable signals for the living.
It is the informational imprints of plants and natural minerals embedded in the resin of the devices that allow this reversal of the effect.
They provide a repository close to nature, very useful to organisms for their functioning.
These devices make it possible to deal with nuisances originating from outside the domain or generated by equipment installed inside the buildings themselves.
They attenuate the effects of disturbances induced or potentiated by the geological nature of the subsoil (faults, cavities, embankments, telluric networks, presence of water, etc.).
6 – Expected effects:
Less fatigue, more comfort and well-being for most of the inhabitants of these previously disturbed places.
Sensitive people may experience immediate relief.
Most people will usually need a few extra days to weeks to experience effectiveness.
Other improvements in the situation, at the level of the walls (in the case of humidity by capillarity), or in the operation of electronic devices (during intermittent breakdowns) could also be observed in a few rare specific cases.
7 – Recommended location and instructions for installation:
Its main use is on the building earth cable.
This cable is generally identifiable by its bare copper braid which extends towards the main electrical panel by a sheathed wire, conventionally, in green and yellow.
At the junction of these two wires, there is often a cut-off bar which can have different aspects (copper – porcelain studs, etc.).
Preferably, a rectilinear and vertical segment will be chosen.
If there is no space to fix the device above the cut-off strip, it is possible, if necessary, to put it directly on the copper braid below. However, direct contact with copper is absolutely not necessary.
This device also works, even placed along a tube (through which the grounding cable passes).
The device is to be fixed, using two (electrician’s) collars in light-coloured plastic, along the cable. It is important that the light (middle hole) remains free (nothing in it).
The wire must imperatively pass outside the device. Position the letter “N” (inscribed in relief) towards the north to keep the resonance (position in which it was manufactured). In addition, to obtain the expected effect, the “N” must be at the top, if the cable comes from the bottom (the earth) to the top (the electrical panel).
Special case: when the ground wire comes from the ceiling, the arrow must then point towards the ground (rare).
8 – Maintenance advice:
The devices can be cleaned with a slightly damp microfiber cloth in case of accumulated dust or stains.
Do not use solvents or other chemicals in contact with them.
Do not expose to temperatures above 60°C.
The devices are to be placed sheltered from bad weather.
9 – Warranty:
AVENI devices are guaranteed for 2 years (excluding adhesive) for any manufacturing-related problems.
10 – Other devices available:
Exceptionally, it could happen that the installation of the AVM-T alone leads to an improvement in the situation, however, it is very strongly recommended to use it in addition to the AVM-E1 (on the water supply) , AVM-L (on the electricity meter) and AVL-85 (on the main electrical panel). The synergy between these different devices allows better results.
Other additional devices may prove necessary (see KIT-M or KIT-ME sheet).
Devices for vehicles (AV-CAR – AV-CARE and AV-CAM) can achieve a similar effect and are intended to remain in the vehicle.
The effect obtained will be better when commonly used electronic devices (mobile phones – tablets – computers…) are harmonized with AVENI devices.